CH-HPC-1MW

Stock clearance only. Valid while stock lasts.

The CH-HPC-1MW  is a medium sized, bracket mounting camera used for many common applications on caravans, light commercials and anywhere a reasonably robust but smaller sized camera will suit.

This camera requires setup before shipping, the default video output is 720P AHD but can be changed to CVBS in PAL or NTSC if required.

Please ensure the video output is noted in the order.

Features

• Programmable video output mode: AHD or Standard Definition
• Programmable CVBS TV format: PAL or NTSC
• 1.2MP camera resolution in HD mode 1960 x 1080 pixels for 1080P output
• 700TVL CVBS resolution
• Custom camera programming is possible including Mirror to Real image change
• Standard Chipatronic 4 Pin cabling solutions are able to be used

The same as other cameras in the Hybrid series, two versions of this camera are available with different angle lenses. As shown below there is a substantial difference in the view from the camera with  a wider or narrower lens.

TheCH-HPC-1MW is the standard model and has a 120^o lens which is most common as this suits a wide range of applications and is considered a general purpose camera.

The CH-HPC-1MW50 uses a 50^o lens which provides a better view of traffic on the road behind or further away and as such is recommended when the main purpose of the camera is to be able to see what is behind the van or vehicle while driving.

This is commonly combined with one of our clip-on mirror monitors or a mirror replacement monitor for use as an eMirror on utilities with a full canopy or trade body and no natural rear vision is possible but by adding this camera with a monitor in the normal mirror location the driver can have rear vision that is very similar to standard.

These cameras are able to be used in various applications including:

• caravan rear-view camera for constant vision of road and traffic behind and reversing
• motorhome rear-view camera for constant vision of road and traffic behind and reversing
• utility with canopy or trade body for constant vision of road and traffic behind and reversing
• construction and agricultural machinery, forward and rear vision systems

The CH-HPC-1MW  is just 56mm wide, 42mm high and 55mm deep (excluding the bracket) but has all of the same features as the entire range of hybrid cameras in a compact housing with standard 4 Pin female connector.

For caravans and motorhomes the dome camera may be used as this is surface mounting, model CH-HPC1WD or CH-HPC1BD.

To use the camera in AHD mode a suitable, AHD compatible monitor will be required.
Please see the CH-RVMAHD72 which clips over the rear-view mirror, the CH-RVM88  which replaces the original mirror or either the CH-STDAHD5 which mounts on the dash or on the inside of the windscreen.