fbpx

Reversing

  • A high quality, number plate mount camera suitable for reversing on most cars, utilities and SUVs. Bright white LEDs provides improved night vision and high sensitivity image sensor gives the best picture quality in day or night use.
    With extra wide angle 170o lens and selectable reverse guidelines this is an good choice for a reversing camera where other styles are not able to be easily monted.

    CH NPC170 guideline change

    The mounting plate sits behind the number plate on the vehicle or it can be mounted elsewhere on a flat surface.

    A mini connector just 5mm wide means that no large holes are required at the camera and this connects to a the included cable harness with 6m video cable (RCA connection) and 12V power.
    The video output is NTSC format with 520TVL resolution.
    Power required is 12V DC.
    CH NPC170 dimensions

  • The CH-SRC1U is a HD Reversing Camera with Selectable Functions for professional installation.

    With 1280 x 720 High Definition sensor, this camera is recommended for cars and light commercial vehicles and comes with a universal bracket mount and professional installation cabling.

    Many lower cost reversing cameras are relatively low resolution, typically 420TVL or 520TVL for a better quality unit but even these only give a maximum of 0.4MP (720H x 576V pixels) which is fine on a small LCD screen but with many cars having larger, in-dash displays a higher resolution camera is required and the Chipatronic HD cameras have 1280 x 720 pixel sensors for high definition video output.

     CH UMC130HD 2small

    The CH-SRC1U is a 800TVL camera with 0.92MP (1280H x 720 pixels) and NTSC video output which suits most factory and aftermarket displays.
    With an extra wide horizontal viewing angle of 130o the camera gives you vision of the area directly behind the car and off to the sides and with "starlight" technology this works even in very low light situations.

    Our new, Professional Installation cable is suited to modern cars where camera power should be supplied directly from an accessory circuit and not from the vehicle tail-lights and 
    Universal bracket mounting means that this can be fitted easily to most cars, utilities and vans without requiring large holes or extensive work.

    SRC1U Cable A

    SRC Pro Cable Loops


    RCA connection with 8m video cable, NTSC format,  12V DC, 170o Diagonal - 140o Horizontal lens

    Please note that this camera can be bundled with the CH-RVMIRS-A or CH-RVM5 as a reversing kit. Please contact us for further details.

  • CH-UMC960AHD Reversing Camera

    High definition reversing camera with bracket mounting to suit most vehicles.


    Most reversing cameras commonly available today are relatively low resolution, typically 420TVL or 520TVL for a better quality unit and even these only give a maximum of 0.4MP (720H x 576V pixels).
    That is fine on a small LCD but with many cars now having 7" and larger display screens fitted these cameras are not providing the image quality to match and you can end up with a very average looking reverse image.
    Chipatronic HD reversing cameras provide clear images in day or night with Starlight technology for better imaging in low light situations and are designed for use on larger screen sizes.

    CH UMC960 

    The CH-UMC960AHD is a 960P camera with 1.2MP (1288H x 968V pixels) with AHD video signal as the default to provide clear and vibrant images when coupled with an AHD monitor. AHD offers superior video quality over traditional CVBS and Chipatronic's range of AHD monitors offers a solution to suit most drivers.

    The CH-UMC960AHD is able to be changed to CVBS-NTSC video output to suit existing monitors and in-dash displays where required and while the video will not be exactly the same, this still offers a quality above most common, aftermarket reversing cameras.
    With an extra wide horizontal viewing angle of 140o the camera gives you vision of the area directly behind the car and off to the sides and with "starlight" technology this works even in very low light situations.
    Standard cabling included is RCA video and separate power supply with mini 4 pin connector for ease of installation.
    UMC Power Cable small CH RCA7
     

    RCA connection with 6m video cable, AHD 960P or CVBS NTSC format,  12V DC, 170
    o Diagonal - 140o Horizontal lens