The CH-AHDMBC is a Mirror Bracket mounting camera for use on trucks with tubular side mirror brackets.
By mounting the cameras on the mirror brackets a clear side view can be achieved which is particularly important with DVR systems on large trucks

This is an AHDcamera for use with either Analogue DVR systems or with Hybrid vehicle monitors and by using a QUAD monitor, simultaneous, side by side view can be provided.
Another popular application is on road maintenance trucks with two side camera and 1 rear camera to allow the driver to see road workers on either side and behind the truck. This also uses a QUAD monitor but in a three camera split screen.

For CVBS systems, please see the CH-CCDMBC.

Standard 4 pin connection, AHD PAL format standard with other formats and resolution available to special order, 720P resolution, 12V DC

The CH-CCDMBC is a Mirror Bracket mounting camera for use on trucks with tubular side mirror brackets.
By mounting the cameras on the mirror brackets a clear side view can be achieved which is particularly important with DVR systems on large trucks

This is a CVBS camera for use with either DVR systems or with standard vehicle monitors and by using a QUAD monitor, simultaneous, side by side view can be provided.
Another popular application is on road maintenance trucks with two side camera and 1 rear camera to allow the driver to see road workers on either side and behind the truck. This also uses a QUAD monitor but in a three camera split screen.

For AHD systems, please see the CH-AHDMBC.

Standard 4 pin connection, PAL format standard with NTSC available to special order, 700TVL resolution, 12V DC

Dual camera are commonly used for caravans and motorhomes with one wide angle camera which can be rotated downwards for reversing and a second narrower angle camera for rear vision while driving which is facing backwards.
The driving camera provides a clearer view of what is behind the van than most standard cameras as it has a narrow lens angle of 65^o rather than the 120^o used for the reversing camera.

The cameras each have a 4 pin connector and a custom adaptor is included to integrate into standard Chipatronic cabling systems.

A special adaptor will be required to connect the cameras to a monitor, depending on whether you have 4 pin or RCA inputs on the monitor being used.

CH-4M2FX is for 4 pin systems 

CH-4MRCA is for RCA systems

White and Black versions are both available.
4 pin connections with NTSC format, 12V DC
IR LEDs for improved night vision on both cameras to 10m

Dual_Camera_Caravan_System.pdf

Full size, heavy duty camera with good night vision suitable for trucks and machinery.

Chipatronic Hybrid Cameras are the latest and most up to date vehicle cameras available currently with features never before seen in the automotive industry.

Hybrid cameras combine traditional composite video (CVBS) with new Analogue High Definition video (AHD) with the ability to change between these two modes by menu programming.
Not only can the camera be changed between video output modes but can also be changed between PAL and NTSC formats to suit the requirements of each individual installation.

FEATURES

• Programmable video output mode: CVBS or AHD
• Programmable video format: PAL or NTSC
• 1.2MP camera resolution in AHD mode (1280x960P equivalent to 1200TVL)
• 700TVL CVBS resolution
• Custom camera programming is possible including Mirror to Real image change
• Standard Chipatronic 4 Pin cabling solutions are able to be used

Model CH-HPC1HB is a heavy duty, box style camera suitable for use in a wide range of automotive applications including:

• DVR camera for video recording on heavy vehicles
• truck and bus reversing camera
• truck blind-spot camera
• construction and agricultural machinery, forward and rear vision system
• caravan rear-view and reversing camera
• motorhome rear-view and reversing camera

The CH-HPC1HB  is 76mm wide 53mm high and 70mm deep with all of the same features as the entire range of hybrid cameras in a full size, heavy duty housing with standard 4 Pin female connector. 18 IR LEDs provide night vision up to 15m.
If a smaller camera in a similar style is preferred please use the CH-HPC1MB.

To use the camera in AHD mode a suitable, AHD compatible monitor will be required.
Please see either CH-RVMAHD7 which clips over the rear-view mirror or the CH-STDAHD7 which mounts on the dash.

Chipatronic_Hybrid_Camera_System.pdf

Surface mount camera for caravan or motorhome use.

Chipatronic Hybrid Cameras are the latest and most up to date vehicle cameras available currently with features never before seen in the automotive industry.

Hybrid cameras combine traditional composite video (CVBS) with new Analogue High Definition video (AHD) with the ability to change between these two modes by menu programming.
Not only can the camera be changed between video output modes but can also be changed between PAL and NTSC formats to suit the requirements of each individual installation.

FEATURES

• Programmable video output mode: CVBS or AHD
• Programmable video format: PAL or NTSC
• 1.2MP camera resolution in AHD mode (1280x960P equivalent to 1200TVL)
• 700TVL CVBS resolution
• Custom camera programming is possible including Mirror to Real image change
• Standard Chipatronic 4 Pin cabling solutions are able to be used

Model CH-HPC1WD is a dome camera for surface mounting and is mainly used on caravans and motorhomes where  the cable is directly behind the camera and will be covered by the camera housing.
This provides a clean finish with no exposed cables and the white housing suits many popular vans.

If the surface mount style is not suitable, please see either the CH-HPC1MB or CH-HPC1HB box style cameras with bracket and black housing.

To use the camera in AHD mode a suitable, AHD compatible monitor will be required. 
Please see either CH-RVMAHD7 which clips over the rear-view mirror or the CH-STDAHD7 which mounts on the dash.
Hybrid cameras can be integrated with in-dash displays but only in CVBS mode, usually with NTSC format.
Factory screen integration is possible but generally only with the addition of additional, specialised hardware. Contact us for further information if factory screen integration is desired.

 To update an older camera system to the latest, high resolution system with hybrid camera and clip-on monitor, please use the HCMKIT2

For a complete, new installation with cables, camera and clip-on monitor, use the HCMKIT3

Heavy Duty, box style camera with Sony 700TVL high resolution sensor for commercial applications, Effective Pixels: 967(H)*494(V).
Sony image sensor provides 700TVL resolution with 16 IR LEDs for improved night vision to 10m. Heavy duty power supply for full time operation, 4 pin connection to integrate with Chipatronic cabling systems. Standard camera is Mirror Image for reverse use but can be easily converted to Real Image for use with DVR systems. Black or Silver body with Stainless Steel bracket.