Hybrid Dual Camera for caravans and motorhomes

Chipatronic Hybrid Cameras are the latest and most up to date vehicle cameras available currently with features never before seen in the automotive industry.

Hybrid cameras combine traditional composite video (CVBS) with new Analogue High Definition video (AHD) with the ability to change between these two modes by menu programming.
Not only can the camera be changed between video output modes but can also be changed between PAL and NTSC formats to suit the requirements of each individual installation.

FEATURES

• Programmable video output mode: CVBS or AHD
• Programmable video format: PAL or NTSC
• 1.2MP camera resolution in AHD mode (1280x960P equivalent to 1200TVL)
• 700TVL CVBS resolution
• Custom camera programming is possible including Mirror to Real image change
• Standard Chipatronic 4 Pin cabling solutions are able to be used

Model CH-HPC2BB is a unique design, dual camera for use on caravans and motorhomes to provide a wide angle, reversing camera to see directly behind and a narrower angle, rear-vision camera for constant use while driving. The rear-vision camera provides an image better suited to normal driving and with AHD video will allow clearer and sharper images from the back of the van when used with one of our high resolution, Hybrid monitors.

• uses two CH-HPC1MB cameras with different lens angles
• Australian made, stainless steel bracket
• unique design allows better adjustment for optimal views
• caravan rear-view and reversing camera
• motorhome rear-view and reversing camera

The CH-HPC2DB  is 125mm wide and 81mm deep with all of the same features as the entire range of hybrid cameras with two standard 4 Pin female connector and a custom made 2:1 adaptor to allow a single caravan cable to be used (see CH-5PC15M or CL-15MA). 
An output adaptor will be required to provide the two separate connections for input into the monitor/display. CH-M2FX is for 4 Pin monitors and CH-4MRCA is for RCA monitors or in-dash head units

To use the camera in AHD mode a suitable, AHD compatible monitor will be required.
Please see CH-RVMAHD7 which clips over the rear-view mirror or either the CH-STDAHD5 or CH-STDAHD7 which mount on the dash.

Chipatronic_Hybrid_Camera_System.pdf

CH-HPC2DB_Instructions.pdf

CH-UMC960AHD Reversing Camera

High definition reversing camera with bracket mounting to suit most vehicles.

Most reversing cameras commonly available today are relatively low resolution, typically 420TVL or 520TVL for a better quality unit and even these only give a maximum of 0.4MP (720H x 576V pixels).
That is fine on a small LCD but with many cars now having 7" and larger display screens fitted these cameras are not providing the image quality to match and you can end up with a very average looking reverse image.
Chipatronic HD reversing cameras provide clear images in day or night with Starlight technology for better imaging in low light situations and are designed for use on larger screen sizes.

The CH-UMC960AHD is a 960P camera with 1.2MP (1288H x 968V pixels) with AHD video signal as the default to provide clear and vibrant images when coupled with an AHD monitor. AHD offers superior video quality over traditional CVBS and Chipatronic's range of AHD monitors offers a solution to suit most drivers.

The CH-UMC960AHD is able to be changed to CVBS-NTSC video output to suit existing monitors and in-dash displays where required and while the video will not be exactly the same, this still offers a quality above most common, aftermarket reversing cameras.
With an extra wide horizontal viewing angle of 140^o the camera gives you vision of the area directly behind the car and off to the sides and with "starlight" technology this works even in very low light situations.
Standard cabling included is RCA video and separate power supply with mini 4 pin connector for ease of installation.
 
 
RCA connection with 6m video cable, AHD 960P or CVBS NTSC format,  12V DC, 170^o Diagonal - 140^o Horizontal lens

The CH-AHD4HD is a heavy duty, box style AHD camera with a high-resolution sensor for commercial applications, Effective Pixels: 1280(H)*960(V) for 720P output.
As this is an AHD camera it cannot be used with legacy video system but is suitable for use with Chipatronic Analogue DVRs, Hybrid Monitors and other AHD compatible devices but 

The CH-AHD4HD is available in three lens options: 120^o for general purpose and reversing use, 65^o for rear-vision in an e-mirror system, 20^o for special applications where the area to be viewed is further away or a small area needs to be shown in high detail.

Heavy duty power supply for full-time operation and 4 pin connection to integrate with Chipatronic cabling systems is standard. Black body only.

As standard, the camera is Mirror Image for reverse use but can be easily converted to Real Image for use with DVR systems. 

A CVBS version of this is also available for use with legacy systems and standard monitors, please see CH-CCD4P-F

CH-AHD4HD.pdf