The CH-RVMAHD73H is a popular choice for caravan towing, motorhomes etc. With a large 7” LCD this Clip-on Mirror/Monitor goes over the original rearview mirror without removing it providing vision from the rear-facing camera exactly where you normally look while driving and still providing a mirror when not in use.
Having the monitor in this position enables checking the rear view when required without having to look down or to change modes on another screen.
The clip-on design allows this to installed easily and it can be left in place as the coated glass is quite suitable for everyday use as a rear-view mirror but is also easily removed after disconnecting the wiring harness which plugs into the monitor by way of a short cable with a multi-pin socket.
Two AHD/CVBS inputs (with 4 pin connections) are available to support either a single or dual camera setup on your van and when used with our high resolution, hybrid cameras in AHD mode, provide exceptional video quality for rear-view or reversing with a 1024 x 600 pixel LCD.
The third channel is mainly intended for a reverse camera so has an RCA connection and is activated by a trigger from the reversing circuit on the vehicle. This suits CVBS cameras only with the CH-SRC1U highly recommended for this.
The CH-RVMAHD73H can also be used on vehicles with a full canopy/service body or enclosed bodywork such as tradesman's utility, delivery van etc. to provide full time rear vision in the same way that a mirror is used.
The two main camera inputs can be selected using the V1/V2 touch button on the glass.
V3 is only activated when the reverse trigger has 12/24V DC applied.
7” LCD, 1024 x 600 pixel
V1/V2 - 4 Pin input x 2, AHD or CVBS
V3 - RCA input, CVBS PAL or NTSC compatible.
Power - 12/24V DC
Recommended camera for single camera rear vision on Caravan: CH-HPC1WD in conjunction with standard caravan cables.
Recommended camera for dual camera rear vision and reversing on Caravan: CH-HPC2DB in conjunction with standard caravan cables.
Recommended camera for reversing applications: CH-SRC1U
The CH-RVM733H is a new generation e-mirror which can be used to replace traditional mirrors in light commercial vehicles where a service body or full canopy has been fitted and rear-vison is restricted.
This comprises a replacement mirror package with a full width, 7.3" LCD with both AHD and CVBS camera support and three video inputs to facilitate a complete rear vision package with advanced imaging technology allowing the use of high-resolution AHD cameras for truly excellent vision, previously not possible.
Where a full service body is fitted and there is no rear-vision possible using the internal, windscreen mounted mirror, AHD cameras can be used at the rear to provide a similar level of image quality to what the driver would expect normally and by using two cameras with different lenses mounted side by side, both normal driving vision and reverse vision can be provided.
A third camera can be added to the system if desired for special purpose use such as front view or if the vehicle is used for towing, a camera can be fitted to show the tow hitch clearly.
The camera which is used constantly for driving will provide a better view of cars on the road behind than most standard cameras as it has a narrower angle lens than is usually standard.
The second camera is used for reversing and this is angled down and has a standard, wide-angle lens to show the area behind with as much detail as possible.
With the CH-RVM733H a customised solution can be provided for fleet operators, service-body builders, canopy suppliers and owners of utilities with canopies fitted as the cameras and cabling are chosen to suit each application rather than a one-size fits all approach.
Chipatronic_CH-RVM733H_e-Mirror.pdf
The CH-STDAHD7 is stand mount 7" LCD monitor with both AHD and CVBS display capability.
This monitor is suitable for use with all cameras but is specifically designed for use with our range of Hybrid Cameras which require AHD displays.
To provide the improved vision offered by AHD cameras the CH-STDAHD7 has a higher resolution LCD with 1024 x 600 pixels so regardless of the cameras used this provides clear, high quality images.
With 3 inputs for 4 Pin cameras this monitor can be used to provide left and right side vision with rear view/reverse or other configurations including dual camera setups.
This monitor suits commercial vehicles and provides clear vision of each camera which can be manually selected or channels 1 and 2 can be triggered independently for automatic operation.
The "U" type bracket is easily mounted and adjusted to suit most applications and optional, stand type brackets are also available using the standard slot in the rear case.
Please select suitable cameras from the range of Hybrid Cameras or other 4 pin cameras.
Adaptors for RCA inputs are available, please see CH-4FRCAS for RCA video cable input.
Specifications
The CH-RVMAHD7 is clip-on, mirror mount 7" LCD monitor with both AHD and CVBS display capability.
This monitor is suitable for use with all cameras but is specifically designed for use with our range of Hybrid Cameras which require AHD displays.
To provide the improved vision offered by AHD cameras the CH-RVMAHD7 has a higher resolution LCD with 1024 x 600 pixels so regardless of the cameras used this provides clear, high quality images.
With 2 inputs for 4 Pin cameras this monitor is frequently used as the main display for caravan cameras including dual camera setups.
This monitor suits most vehicles with a standard rear-view mirror, clipping over this to function predominantly as a monitor and provides clear vision of each camera which can be manually selected or channel 2 can be triggered independently for automatic operation (usually when reverse gear is selected).
The glass is coated to enable limited use as a mirror when the monitor is not operating.
Please select suitable cameras from the range of Hybrid Cameras or other 4 pin cameras.
Adaptors for RCA inputs are available, please see CH-4FRCAS for RCA video cable input.
To upgrade an older camera system to the latest, high resolution system with hybrid camera and monitor, please use the HCMKIT2
For a complete new installation with cables, camera and clip-on monitor, use the HCMKIT3
CH-RVMAHD7_Specification-Instructions.pdf
IMPORTER AND DISTRIBUTOR OF AUTOMOTIVE AV PRODUCTS
